Convert each reactant's mass to moles, then divide each by its coefficient in the balanced equation. The reactant with the smallest result is the limiting reactant: it runs out first and decides how much product can form. The other reactant is in excess. Never decide by comparing grams — or even raw moles — alone.
Loading the interactive solver… The worked examples below show every step.
The method in five steps
- Balance the equation. Every later step depends on the coefficients, so an unbalanced equation gives a wrong answer even if the arithmetic is perfect.
- Convert each mass to moles. Divide grams by molar mass (g/mol).
- Divide each mole amount by its coefficient. This puts every reactant on the same scale: "how many times could the reaction run?"
- The smallest value is the limiting reactant. It runs out first.
- Use the limiting reactant for everything else. Theoretical yield and leftover excess both come from its mole amount and the mole ratio.
Why you divide by the coefficient
Suppose you have 1.0 mol of H2 and 0.8 mol of O2 for 2H2 + O2 → 2H2O. Oxygen looks scarcer. But the reaction uses hydrogen twice as fast: 1.0 mol of H2 can only react with 0.5 mol of O2. Dividing by coefficients shows it immediately — 1.0 ÷ 2 = 0.5 for H2 against 0.8 ÷ 1 = 0.8 for O2 — so hydrogen is limiting, and 0.3 mol of oxygen is left over.
Some textbooks instead calculate how much product each reactant could make, and pick the one that makes less. It always gives the same answer. Dividing by coefficients is just faster when you only need to identify the limiting reactant.
Problem 1: hydrogen and oxygen
- Moles. H2: 4.0 g ÷ 2.016 g/mol = 1.984 mol. O2: 16.0 g ÷ 31.998 g/mol = 0.5000 mol.
- Divide by coefficients. H2: 1.984 ÷ 2 = 0.9921. O2: 0.5000 ÷ 1 = 0.5000.
- Limiting reactant: O2 (0.5000 is smaller).
- Product. 0.5000 mol O2 × (2 H2O / 1 O2) = 1.000 mol H2O × 18.015 g/mol = 18.0 g of water.
- Excess left. H2 used: 1.000 mol. Remaining: 1.984 − 1.000 = 0.984 mol, which is 1.98 g.
Oxygen was limiting even though you had four times as much of it by mass. Grams alone never decide it.
Problem 2: making ammonia
- Moles. N2: 28.0 ÷ 28.014 = 0.9995 mol. H2: 9.0 ÷ 2.016 = 4.464 mol.
- Divide by coefficients. N2: 0.9995 ÷ 1 = 0.9995. H2: 4.464 ÷ 3 = 1.488.
- Limiting reactant: N2.
- Product. 0.9995 mol N2 × (2 NH3 / 1 N2) = 1.999 mol × 17.031 g/mol = 34.0 g of ammonia.
- Excess left. H2 used: 0.9995 × 3 = 2.999 mol. Remaining: 1.466 mol, about 2.96 g (3.0 g to two significant figures, matching the 9.0 g given).
Problem 3: equal masses, unequal amounts
- Moles. Fe: 10.0 ÷ 55.845 = 0.1791 mol. O2: 10.0 ÷ 31.998 = 0.3125 mol.
- Divide by coefficients. Fe: 0.1791 ÷ 4 = 0.04477. O2: 0.3125 ÷ 3 = 0.1042.
- Limiting reactant: Fe.
- Product. 0.1791 mol Fe × (2 Fe2O3 / 4 Fe) = 0.08953 mol × 159.69 g/mol = 14.3 g of iron(III) oxide.
- Excess left. O2 used: 0.1791 × 3/4 = 0.1343 mol. Remaining: 0.1782 mol, which is 5.70 g.
The solver above is pre-loaded with this problem — change the numbers to check your own. To turn the theoretical yield into a percentage, see how to calculate percent yield.
Common mistakes
- Assuming the first reactant listed is limiting. Order in the equation means nothing. In Problem 1, the second reactant was limiting.
- Comparing grams. Equal masses rarely mean equal amounts, as Problem 3 shows. Always convert to moles.
- Comparing raw moles without dividing by coefficients. This picks the wrong reactant whenever the coefficients differ.
- Calculating the product from the excess reactant. Only the limiting reactant sets the theoretical yield.
- Using an unbalanced equation. Check the balance before any arithmetic.
Practice problems
Find the limiting reactant and the theoretical yield. Tap to reveal. (Answers use IUPAC atomic weights; textbook rounding can change the last digit.)
- 2Na + Cl2 → 2NaCl, with 5.0 g Na and 5.0 g Cl2
Show answer
Cl2 is limiting; 8.24 g NaCl
- CH4 + 2O2 → CO2 + 2H2O, with 8.0 g CH4 and 16.0 g O2 — find the mass of CO2
Show answer
O2 is limiting; 11.0 g CO2
- 2Al + 3Cl2 → 2AlCl3, with 2.70 g Al and 7.09 g Cl2
Show answer
Cl2 is limiting; 8.89 g AlCl3
Questions students ask
Is the limiting reactant always the one with fewer moles?
No — only after dividing by the coefficients. With 1.0 mol H2 and 0.8 mol O2, oxygen has fewer moles, but hydrogen is limiting because the reaction uses two H2 per O2.
What if both values come out equal?
Then the reactants are in exact stoichiometric proportion: both run out at the same moment and nothing is left over. Either one can be used to calculate the product.
What is the excess reactant?
The reactant that isn't limiting. Some of it remains when the reaction stops; subtract the amount used from the amount you started with to find how much.
Stuck on a stoichiometry problem?
Scan it with Aheadia for a worked, unit-by-unit solution — chemistry included, not just math.
Download free on iOS