Percent yield = (actual yield ÷ theoretical yield) × 100. The actual yield is what you measured in the lab; the theoretical yield is the maximum the limiting reactant allows. To find the theoretical yield, go grams of limiting reactant → moles → mole ratio → moles of product → grams of product.
Loading the interactive solver… The worked examples below show every step.
The formula
Both yields must be in the same units — usually grams. The division itself is the easy part; almost all the work, and almost all the mistakes, are in finding the theoretical yield.
Example 1: one reactant, from grams
- Moles of reactant. 50.0 g ÷ 100.09 g/mol = 0.4996 mol CaCO3.
- Mole ratio. 1 CaCO3 gives 1 CaO, so 0.4996 mol CaO.
- Theoretical yield in grams. 0.4996 mol × 56.077 g/mol = 28.0 g CaO.
- Percent yield. 26.0 ÷ 28.0 × 100 = 92.8%.
A common error here is dividing 26.0 by 50.0. That compares the product to the reactant mass, which means nothing — mass is shared between the products, so reactant and product masses aren't comparable.
Example 2: two reactants (find the limiting one first)
- Find the limiting reactant. Fe: 10.0 ÷ 55.845 = 0.1791 mol, ÷ 4 = 0.04477. O2: 10.0 ÷ 31.998 = 0.3125 mol, ÷ 3 = 0.1042. Iron is limiting.
- Theoretical yield. 0.1791 mol Fe × (2/4) = 0.08953 mol Fe2O3 × 159.69 g/mol = 14.3 g.
- Percent yield. 12.5 ÷ 14.3 × 100 = 87.4%.
With two reactants, the theoretical yield always comes from the limiting reactant. The full method is in how to find the limiting reactant — and the solver above is pre-loaded with this example.
Example 3: working backwards
You need 20.0 g of CaO and expect an 85.0% yield. How much CaCO3 should you start with?
- Theoretical yield needed. Actual = 0.850 × theoretical, so theoretical = 20.0 ÷ 0.850 = 23.53 g CaO.
- Moles of product. 23.53 ÷ 56.077 = 0.4196 mol CaO.
- Moles of reactant. 1 : 1 ratio, so 0.4196 mol CaCO3.
- Mass of reactant. 0.4196 × 100.09 = 42.0 g CaCO3.
Dividing by the yield, not multiplying, is the step to watch: you need more starting material than the 100% calculation suggests.
Why yields fall short of 100%
- The reaction doesn't go to completion, often because it's reversible and reaches equilibrium.
- Side reactions consume some reactant to make unwanted products.
- Physical losses — product left on filter paper or glassware, or spilled during transfer.
- Impure reactants, so less real reactant was present than the mass suggests.
A yield above 100% doesn't mean you made extra product. It almost always means the product is still wet, is contaminated, or that there's an error in the calculation.
Common mistakes
- Dividing product mass by reactant mass. Theoretical yield must be calculated through moles and the mole ratio.
- Skipping the mole ratio. If the coefficients aren't 1 : 1, the moles of product differ from the moles of reactant.
- Using the excess reactant to calculate the theoretical yield in a two-reactant problem.
- Flipping the fraction. Actual goes on top. Theoretical yield is the maximum, so a correct answer is usually below 100%.
Practice problems
Tap to reveal. (Answers use IUPAC atomic weights; textbook rounding can change the last digit.)
- Theoretical yield 40.0 g, actual yield 32.5 g. Percent yield?
Show answer
81.3%
- 2H2 + O2 → 2H2O with 4.0 g H2 and 16.0 g O2; you collect 15.3 g of water
Show answer
Theoretical yield 18.0 g (O2 limiting); percent yield 84.9%
- 25.0 g CaCO3 is heated and 12.0 g CaO is collected
Show answer
Theoretical yield 14.0 g CaO; percent yield 85.7%
- A reaction has a theoretical yield of 12.0 g and a 75.0% yield. How much product is collected?
Show answer
9.00 g
Questions students ask
What's the difference between actual and theoretical yield?
Theoretical yield is the maximum amount of product the limiting reactant could make, calculated on paper. Actual yield is what you really collect and weigh, which is almost always less.
Can percent yield be over 100%?
Not for a pure, dry product. A result over 100% signals water or impurities in the product, or a calculation error — check your theoretical yield first.
Do I need the limiting reactant for percent yield?
Only when there's more than one reactant. With a single reactant, it's automatically limiting; with two or more, find the limiting one before calculating the theoretical yield.
Check your lab calculation
Scan the problem with Aheadia and compare your working against a step-by-step solution, units carried through every line.
Download free on iOS